Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | BRS-100-GW1NR9 | GW2A-18 Video Development Kit (PG484) | TE0890 | Tang Mega 60K Dock |
|---|---|---|---|---|
| FPGA | GW1NR-LV9QFN88PC7 | GW2A-LV18PG484C8I7 | XC7S25-1FTGB196C | GW5AT-LV60PG484AC1/I0 |
| Family | GW1NR | GW2A | Spartan-7 | GW5A |
| Logic (LUTs) | not listed | not listed | not listed | 59904 |
| Price | at the seller | at the seller | at the seller | at the seller |
| Open toolchain | Project Apicula | Project Apicula | Project X-Ray / openXC7 | no |
| Toolchains | Gowin EDA, Project Apicula | Gowin EDA, Project Apicula | AMD Vivado, Project X-Ray / openXC7 | Gowin EDA, LiteX (litex-boards sipeed_tang_mega_60k), openFPGALoader (GW5AT-60) |
| Interfaces | not listed | HDMI_IN, HDMI_OUT, MIPI_CSI, MIPI_DSI | not listed | PCIe 2.0 card-edge (x1 mode only at present), USB 3.0 (CH569, 5 Gbps), Gigabit Ethernet, HDMI/DVI (TX and RX), SD slot (1-bit SDIO/MMC or SPI), USB JTAG, USB UART, Differential ADC channels |
| Memory | not listed | not listed | not listed | DDR3 4 Gbit (512 MB), Onboard flash 64 Mbit |
| Level | Intermediate | Intermediate | Intermediate | Professional |
| Where to get help | official docs | official docs | official docs | Sipeed forum, r/GowinFPGA |
| Known issues | — | — | — | PCIe works in x1 mode only; Minimum Gowin IDE version; 3.3 V I/O limit |