Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | Arty A7 | CrossLinkU-NX Evaluation | Tang Mega 60K Dock | EMC2-ZU5EV |
|---|---|---|---|---|
| FPGA | XC7A35TICSG324-1L | LIFCL-33U-7CTG104C | GW5AT-LV60PG484AC1/I0 | XCZU5EV-1SFVC784I |
| Family | Artix-7 | LIFCL | GW5A | Zynq UltraScale+ MPSoC |
| Logic (LUTs) | not listed | not listed | 59904 | not listed |
| Price | at the seller | at the seller | at the seller | at the seller |
| Open toolchain | Project X-Ray / openXC7 | no | no | no |
| Toolchains | Vivado WebPACK / ML Standard | Lattice Radiant | Gowin EDA, LiteX (litex-boards sipeed_tang_mega_60k), openFPGALoader (GW5AT-60) | AMD Vivado |
| Interfaces | Ethernet, USB UART, USB-JTAG | not listed | PCIe 2.0 card-edge (x1 mode only at present), USB 3.0 (CH569, 5 Gbps), Gigabit Ethernet, HDMI/DVI (TX and RX), SD slot (1-bit SDIO/MMC or SPI), USB JTAG, USB UART, Differential ADC channels | PCIe, Ethernet, HDMI_OUT |
| Memory | DDR3 variant-specific; verify in Digilent memory tab | not listed | DDR3 4 Gbit (512 MB), Onboard flash 64 Mbit | not listed |
| Level | Beginner | Intermediate | Professional | Intermediate |
| Where to get help | Digilent Forum | official docs | Sipeed forum, r/GowinFPGA | official docs |
| Known issues | 35T and 100T variants differ | — | PCIe works in x1 mode only; Minimum Gowin IDE version; 3.3 V I/O limit | — |