Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | iCEBreaker | Arty A7 | GW2A-18 Starter Kit | LIFCL-40-EVN |
|---|---|---|---|---|
| FPGA | iCE40UP5K-SG48 | XC7A35TICSG324-1L | GW2A-LV18PG256C8I7 | LIFCL-40-9BG400C |
| Family | iCE40 UltraPlus | Artix-7 | GW2A | LIFCL |
| Logic (LUTs) | 5280 | not listed | not listed | not listed |
| Price | at the seller | at the seller | at the seller | at the seller |
| Open toolchain | Project IceStorm | Project X-Ray / openXC7 | Project Apicula | no |
| Toolchains | Yosys + nextpnr + IceStorm, Lattice Diamond Programmer | Vivado WebPACK / ML Standard | Gowin EDA, Project Apicula | Lattice Radiant |
| Interfaces | microUSB FT2232H, FT2232H programming, USB serial | Ethernet, USB UART, USB-JTAG | Ethernet | MIPI_CSI |
| Memory | QSPI flash 128 Mbit | DDR3 variant-specific; verify in Digilent memory tab | not listed | not listed |
| Level | Beginner | Beginner | Intermediate | Intermediate |
| Where to get help | iCEBreaker community docs | Digilent Forum | official docs | official docs |
| Known issues | — | 35T and 100T variants differ | — | — |