Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | iCEBreaker | Vaaman | Tang Mega 60K Dock | LIFCL-40-EVN |
|---|---|---|---|---|
| FPGA | iCE40UP5K-SG48 | T120F324C3 | GW5AT-LV60PG484AC1/I0 | LIFCL-40-9BG400C |
| Family | iCE40 UltraPlus | Trion | GW5A | LIFCL |
| Logic (LUTs) | 5280 | not listed | 59904 | not listed |
| Price | at the seller | at the seller | at the seller | at the seller |
| Open toolchain | Project IceStorm | no | no | no |
| Toolchains | Yosys + nextpnr + IceStorm, Lattice Diamond Programmer | Efinity | Gowin EDA, LiteX (litex-boards sipeed_tang_mega_60k), openFPGALoader (GW5AT-60) | Lattice Radiant |
| Interfaces | microUSB FT2232H, FT2232H programming, USB serial | Ethernet, HDMI_OUT, DISPLAYPORT, MIPI_DSI, MIPI_CSI | PCIe 2.0 card-edge (x1 mode only at present), USB 3.0 (CH569, 5 Gbps), Gigabit Ethernet, HDMI/DVI (TX and RX), SD slot (1-bit SDIO/MMC or SPI), USB JTAG, USB UART, Differential ADC channels | MIPI_CSI |
| Memory | QSPI flash 128 Mbit | not listed | DDR3 4 Gbit (512 MB), Onboard flash 64 Mbit | not listed |
| Level | Beginner | Intermediate | Professional | Intermediate |
| Where to get help | iCEBreaker community docs | official docs | Sipeed forum, r/GowinFPGA | official docs |
| Known issues | — | — | PCIe works in x1 mode only; Minimum Gowin IDE version; 3.3 V I/O limit | — |