Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | ECP5 Versa Development Kit | CrossLinkU-NX Evaluation | LFE5UM5G-85F-EVN | Tang Mega 60K Dock |
|---|---|---|---|---|
| FPGA | LFE5UM-45F | LIFCL-33U-7CTG104C | LFE5UM5G-85F-8BG381C | GW5AT-LV60PG484AC1/I0 |
| Family | ECP5 | LIFCL | LFE5UM5G | GW5A |
| Logic (LUTs) | not listed | not listed | not listed | 59904 |
| Price | at the seller | at the seller | at the seller | at the seller |
| Open toolchain | Project Trellis | no | no | no |
| Toolchains | Lattice Diamond, Yosys + nextpnr + Project Trellis | Lattice Radiant | Lattice Radiant | Gowin EDA, LiteX (litex-boards sipeed_tang_mega_60k), openFPGALoader (GW5AT-60) |
| Interfaces | Ethernet, PCIe | not listed | not listed | PCIe 2.0 card-edge (x1 mode only at present), USB 3.0 (CH569, 5 Gbps), Gigabit Ethernet, HDMI/DVI (TX and RX), SD slot (1-bit SDIO/MMC or SPI), USB JTAG, USB UART, Differential ADC channels |
| Memory | not listed | not listed | not listed | DDR3 4 Gbit (512 MB), Onboard flash 64 Mbit |
| Level | Professional | Intermediate | Intermediate | Professional |
| Where to get help | YosysHQ open-source tooling | official docs | official docs | Sipeed forum, r/GowinFPGA |
| Known issues | — | — | — | PCIe works in x1 mode only; Minimum Gowin IDE version; 3.3 V I/O limit |