Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | PolarFire SoC Icicle Kit | TE0890 | Tang Mega 60K Dock | Titanium Ti180 M484 Development Kit |
|---|---|---|---|---|
| FPGA | MPFS250T | XC7S25-1FTGB196C | GW5AT-LV60PG484AC1/I0 | Ti180J484I3 |
| Family | PolarFire SoC | Spartan-7 | GW5A | Titanium |
| Logic (LUTs) | not listed | not listed | 59904 | not listed |
| Price | at the seller | at the seller | at the seller | at the seller |
| Open toolchain | no | Project X-Ray / openXC7 | no | no |
| Toolchains | Libero SoC | AMD Vivado, Project X-Ray / openXC7 | Gowin EDA, LiteX (litex-boards sipeed_tang_mega_60k), openFPGALoader (GW5AT-60) | Efinity |
| Interfaces | Ethernet, USB | not listed | PCIe 2.0 card-edge (x1 mode only at present), USB 3.0 (CH569, 5 Gbps), Gigabit Ethernet, HDMI/DVI (TX and RX), SD slot (1-bit SDIO/MMC or SPI), USB JTAG, USB UART, Differential ADC channels | HDMI, Ethernet, MIPI CSI |
| Memory | DDR4 requires Microchip docs verification | not listed | DDR3 4 Gbit (512 MB), Onboard flash 64 Mbit | not listed |
| Level | Professional | Intermediate | Professional | Professional |
| Where to get help | Microchip forums | official docs | Sipeed forum, r/GowinFPGA | Efinix support |
| Known issues | — | — | PCIe works in x1 mode only; Minimum Gowin IDE version; 3.3 V I/O limit | — |