Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | Tang Mega 60K Dock | MicroZed | LFE5UM5G-85F-EVN | GW1N-9 Starter Kit |
|---|---|---|---|---|
| FPGA | GW5AT-LV60PG484AC1/I0 | XC7Z010-1CLG400C | LFE5UM5G-85F-8BG381C | GW1N-LV9EQ144C6I5 |
| Family | GW5A | Zynq-7000 | LFE5UM5G | GW1N |
| Logic (LUTs) | 59904 | not listed | not listed | not listed |
| Price | at the seller | at the seller | at the seller | at the seller |
| Open toolchain | no | Project X-Ray / openXC7 | no | Project Apicula |
| Toolchains | Gowin EDA, LiteX (litex-boards sipeed_tang_mega_60k), openFPGALoader (GW5AT-60) | AMD Vivado, Project X-Ray / openXC7 | Lattice Radiant | Gowin EDA, Project Apicula |
| Interfaces | PCIe 2.0 card-edge (x1 mode only at present), USB 3.0 (CH569, 5 Gbps), Gigabit Ethernet, HDMI/DVI (TX and RX), SD slot (1-bit SDIO/MMC or SPI), USB JTAG, USB UART, Differential ADC channels | Ethernet | not listed | MIPI_CSI |
| Memory | DDR3 4 Gbit (512 MB), Onboard flash 64 Mbit | not listed | not listed | not listed |
| Level | Professional | Intermediate | Intermediate | Intermediate |
| Where to get help | Sipeed forum, r/GowinFPGA | official docs | official docs | official docs |
| Known issues | PCIe works in x1 mode only; Minimum Gowin IDE version; 3.3 V I/O limit | — | — | — |