Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | Tang Nano 9K | MicroZed | CrossLinkU-NX Evaluation | GW2A-55 Starter Kit (PG484) |
|---|---|---|---|---|
| FPGA | GW1NR-LV9QN88PC6/I5 | XC7Z010-1CLG400C | LIFCL-33U-7CTG104C | GW2A-LV55PG484C8I7 |
| Family | GW1NR | Zynq-7000 | LIFCL | GW2A |
| Logic (LUTs) | 8640 | not listed | not listed | not listed |
| Price | 14.5 USD | at the seller | at the seller | at the seller |
| Open toolchain | Project Apicula | Project X-Ray / openXC7 | no | Project Apicula |
| Toolchains | Gowin EDA, Yosys + nextpnr-gowin + Apicula | AMD Vivado, Project X-Ray / openXC7 | Lattice Radiant | Gowin EDA, Project Apicula |
| Interfaces | HDMI, USB Type-C, Onboard JTAG, USB UART | Ethernet | not listed | Ethernet, MIPI_CSI, MIPI_DSI |
| Memory | PSRAM 64 Mbit, Onboard flash 32 Mbit | not listed | not listed | not listed |
| Level | Beginner | Intermediate | Intermediate | Intermediate |
| Where to get help | r/GowinFPGA | official docs | official docs | official docs |
| Known issues | Open-source flow is feature-dependent | — | — | — |