Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | Arty A7 | iCEBreaker | Tang Nano 20K |
|---|---|---|---|
| FPGA | XC7A35TICSG324-1L | iCE40UP5K-SG48 | GW2AR-LV18QN88C8/I7 |
| Family | Artix-7 | iCE40 UltraPlus | GW2AR |
| Logic (LUTs) | not listed | 5280 | 20736 |
| Price | at the seller | at the seller | 28.17 USD |
| Open toolchain | Project X-Ray / openXC7 | Project IceStorm | Project Apicula |
| Toolchains | Vivado WebPACK / ML Standard | Yosys + nextpnr + IceStorm, Lattice Diamond Programmer | Gowin EDA, Yosys + nextpnr-gowin + Apicula |
| Interfaces | Ethernet, USB UART, USB-JTAG | microUSB FT2232H, FT2232H programming, USB serial | HDMI, MAX98357A I2S amplifier path, TF card slot, USB Type-C, Onboard BL616 JTAG, USB UART |
| Memory | DDR3 variant-specific; verify in Digilent memory tab | QSPI flash 128 Mbit | 32-bit SDR SDRAM 64 Mbit, Onboard flash 64 Mbit |
| Level | Beginner | Beginner | Beginner |
| Where to get help | Digilent Forum | iCEBreaker community docs | Sipeed forum, r/GowinFPGA |
| Known issues | 35T and 100T variants differ | — | Onboard debugger recognition; Flash persistence mode |