Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | iCEBreaker | Tang Nano 20K | EMC2-ZU5EV |
|---|---|---|---|
| FPGA | iCE40UP5K-SG48 | GW2AR-LV18QN88C8/I7 | XCZU5EV-1SFVC784I |
| Family | iCE40 UltraPlus | GW2AR | Zynq UltraScale+ MPSoC |
| Logic (LUTs) | 5280 | 20736 | not listed |
| Price | at the seller | 28.17 USD | at the seller |
| Open toolchain | Project IceStorm | Project Apicula | no |
| Toolchains | Yosys + nextpnr + IceStorm, Lattice Diamond Programmer | Gowin EDA, Yosys + nextpnr-gowin + Apicula | AMD Vivado |
| Interfaces | microUSB FT2232H, FT2232H programming, USB serial | HDMI, MAX98357A I2S amplifier path, TF card slot, USB Type-C, Onboard BL616 JTAG, USB UART | PCIe, Ethernet, HDMI_OUT |
| Memory | QSPI flash 128 Mbit | 32-bit SDR SDRAM 64 Mbit, Onboard flash 64 Mbit | not listed |
| Level | Beginner | Beginner | Intermediate |
| Where to get help | iCEBreaker community docs | Sipeed forum, r/GowinFPGA | official docs |
| Known issues | — | Onboard debugger recognition; Flash persistence mode | — |