Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | Tang Nano 20K | MicroZed | GW2A-18 Starter Kit |
|---|---|---|---|
| FPGA | GW2AR-LV18QN88C8/I7 | XC7Z010-1CLG400C | GW2A-LV18PG256C8I7 |
| Family | GW2AR | Zynq-7000 | GW2A |
| Logic (LUTs) | 20736 | not listed | not listed |
| Price | 28.17 USD | at the seller | at the seller |
| Open toolchain | Project Apicula | Project X-Ray / openXC7 | Project Apicula |
| Toolchains | Gowin EDA, Yosys + nextpnr-gowin + Apicula | AMD Vivado, Project X-Ray / openXC7 | Gowin EDA, Project Apicula |
| Interfaces | HDMI, MAX98357A I2S amplifier path, TF card slot, USB Type-C, Onboard BL616 JTAG, USB UART | Ethernet | Ethernet |
| Memory | 32-bit SDR SDRAM 64 Mbit, Onboard flash 64 Mbit | not listed | not listed |
| Level | Beginner | Intermediate | Intermediate |
| Where to get help | Sipeed forum, r/GowinFPGA | official docs | official docs |
| Known issues | Onboard debugger recognition; Flash persistence mode | — | — |