Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | DE10-Lite | iCEBreaker | Nexys A7 | Tang Nano 20K |
|---|---|---|---|---|
| FPGA | 10M50DAF484C7G | iCE40UP5K-SG48 | XC7A100T-1CSG324C | GW2AR-LV18QN88C8/I7 |
| Family | MAX 10 | iCE40 UltraPlus | Artix-7 | GW2AR |
| Logic (LUTs) | not listed | 5280 | not listed | 20736 |
| Price | at the seller | at the seller | at the seller | 28.17 USD |
| Open toolchain | no | Project IceStorm | Project X-Ray / openXC7 | Project Apicula |
| Toolchains | Intel Quartus Prime | Yosys + nextpnr + IceStorm, Lattice Diamond Programmer | Vivado WebPACK / ML Standard | Gowin EDA, Yosys + nextpnr-gowin + Apicula |
| Interfaces | VGA, USB-Blaster | microUSB FT2232H, FT2232H programming, USB serial | Ethernet, VGA, USB | HDMI, MAX98357A I2S amplifier path, TF card slot, USB Type-C, Onboard BL616 JTAG, USB UART |
| Memory | SDRAM requires Terasic manual verification | QSPI flash 128 Mbit | DDR2 requires verification from Digilent resource center | 32-bit SDR SDRAM 64 Mbit, Onboard flash 64 Mbit |
| Level | Beginner | Beginner | Beginner | Beginner |
| Where to get help | Terasic support | iCEBreaker community docs | Digilent Forum | Sipeed forum, r/GowinFPGA |
| Known issues | — | — | — | Onboard debugger recognition; Flash persistence mode |