Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | DE10-Lite | Tang Nano 20K | iCEBreaker | Basys 3 |
|---|---|---|---|---|
| FPGA | 10M50DAF484C7G | GW2AR-LV18QN88C8/I7 | iCE40UP5K-SG48 | XC7A35T-1CPG236C |
| Family | MAX 10 | GW2AR | iCE40 UltraPlus | Artix-7 |
| Logic (LUTs) | not listed | 20736 | 5280 | not listed |
| Price | at the seller | 28.17 USD | at the seller | at the seller |
| Open toolchain | no | Project Apicula | Project IceStorm | Project X-Ray / openXC7 |
| Toolchains | Intel Quartus Prime | Gowin EDA, Yosys + nextpnr-gowin + Apicula | Yosys + nextpnr + IceStorm, Lattice Diamond Programmer | Vivado WebPACK / ML Standard |
| Interfaces | VGA, USB-Blaster | HDMI, MAX98357A I2S amplifier path, TF card slot, USB Type-C, Onboard BL616 JTAG, USB UART | microUSB FT2232H, FT2232H programming, USB serial | VGA, USB, USB-JTAG |
| Memory | SDRAM requires Terasic manual verification | 32-bit SDR SDRAM 64 Mbit, Onboard flash 64 Mbit | QSPI flash 128 Mbit | not listed |
| Level | Beginner | Beginner | Beginner | Beginner |
| Where to get help | Terasic support | Sipeed forum, r/GowinFPGA | iCEBreaker community docs | Digilent Forum |
| Known issues | — | Onboard debugger recognition; Flash persistence mode | — | — |