Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | DE10-Lite | PFP-KX7_Plus-310LC | Tang Nano 20K | Arty A7 |
|---|---|---|---|---|
| FPGA | 10M50DAF484C7G | XC7K325T-1FBG676C | GW2AR-LV18QN88C8/I7 | XC7A35TICSG324-1L |
| Family | MAX 10 | Kintex-7 | GW2AR | Artix-7 |
| Logic (LUTs) | not listed | not listed | 20736 | not listed |
| Price | at the seller | at the seller | 28.17 USD | at the seller |
| Open toolchain | no | Project X-Ray / openXC7 | Project Apicula | Project X-Ray / openXC7 |
| Toolchains | Intel Quartus Prime | AMD Vivado, Project X-Ray / openXC7 | Gowin EDA, Yosys + nextpnr-gowin + Apicula | Vivado WebPACK / ML Standard |
| Interfaces | VGA, USB-Blaster | PCIe | HDMI, MAX98357A I2S amplifier path, TF card slot, USB Type-C, Onboard BL616 JTAG, USB UART | Ethernet, USB UART, USB-JTAG |
| Memory | SDRAM requires Terasic manual verification | not listed | 32-bit SDR SDRAM 64 Mbit, Onboard flash 64 Mbit | DDR3 variant-specific; verify in Digilent memory tab |
| Level | Beginner | Intermediate | Beginner | Beginner |
| Where to get help | Terasic support | official docs | Sipeed forum, r/GowinFPGA | Digilent Forum |
| Known issues | — | — | Onboard debugger recognition; Flash persistence mode | 35T and 100T variants differ |