Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | DE10-Nano | iCEBreaker | Tang Nano 9K | Vaaman |
|---|---|---|---|---|
| FPGA | 5CSEBA6U23I7 | iCE40UP5K-SG48 | GW1NR-LV9QN88PC6/I5 | T120F324C3 |
| Family | Cyclone V SoC | iCE40 UltraPlus | GW1NR | Trion |
| Logic (LUTs) | not listed | 5280 | 8640 | not listed |
| Price | at the seller | at the seller | 14.5 USD | at the seller |
| Open toolchain | Mistral | Project IceStorm | Project Apicula | no |
| Toolchains | Intel Quartus Prime | Yosys + nextpnr + IceStorm, Lattice Diamond Programmer | Gowin EDA, Yosys + nextpnr-gowin + Apicula | Efinity |
| Interfaces | HDMI TX, Ethernet, USB | microUSB FT2232H, FT2232H programming, USB serial | HDMI, USB Type-C, Onboard JTAG, USB UART | Ethernet, HDMI_OUT, DISPLAYPORT, MIPI_DSI, MIPI_CSI |
| Memory | HPS DDR3 requires Terasic manual verification | QSPI flash 128 Mbit | PSRAM 64 Mbit, Onboard flash 32 Mbit | not listed |
| Level | Intermediate | Beginner | Beginner | Intermediate |
| Where to get help | Terasic support | iCEBreaker community docs | r/GowinFPGA | official docs |
| Known issues | — | — | Open-source flow is feature-dependent | — |