Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | DE10-Nano | Tang Nano 9K | iCEBreaker | MicroZed |
|---|---|---|---|---|
| FPGA | 5CSEBA6U23I7 | GW1NR-LV9QN88PC6/I5 | iCE40UP5K-SG48 | XC7Z010-1CLG400C |
| Family | Cyclone V SoC | GW1NR | iCE40 UltraPlus | Zynq-7000 |
| Logic (LUTs) | not listed | 8640 | 5280 | not listed |
| Price | at the seller | 14.5 USD | at the seller | at the seller |
| Open toolchain | Mistral | Project Apicula | Project IceStorm | Project X-Ray / openXC7 |
| Toolchains | Intel Quartus Prime | Gowin EDA, Yosys + nextpnr-gowin + Apicula | Yosys + nextpnr + IceStorm, Lattice Diamond Programmer | AMD Vivado, Project X-Ray / openXC7 |
| Interfaces | HDMI TX, Ethernet, USB | HDMI, USB Type-C, Onboard JTAG, USB UART | microUSB FT2232H, FT2232H programming, USB serial | Ethernet |
| Memory | HPS DDR3 requires Terasic manual verification | PSRAM 64 Mbit, Onboard flash 32 Mbit | QSPI flash 128 Mbit | not listed |
| Level | Intermediate | Beginner | Beginner | Intermediate |
| Where to get help | Terasic support | r/GowinFPGA | iCEBreaker community docs | official docs |
| Known issues | — | Open-source flow is feature-dependent | — | — |