Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | DE10-Nano | Tang Nano 9K | MicroZed | PFP-KX7_Plus-310LC |
|---|---|---|---|---|
| FPGA | 5CSEBA6U23I7 | GW1NR-LV9QN88PC6/I5 | XC7Z010-1CLG400C | XC7K325T-1FBG676C |
| Family | Cyclone V SoC | GW1NR | Zynq-7000 | Kintex-7 |
| Logic (LUTs) | not listed | 8640 | not listed | not listed |
| Price | at the seller | 14.5 USD | at the seller | at the seller |
| Open toolchain | Mistral | Project Apicula | Project X-Ray / openXC7 | Project X-Ray / openXC7 |
| Toolchains | Intel Quartus Prime | Gowin EDA, Yosys + nextpnr-gowin + Apicula | AMD Vivado, Project X-Ray / openXC7 | AMD Vivado, Project X-Ray / openXC7 |
| Interfaces | HDMI TX, Ethernet, USB | HDMI, USB Type-C, Onboard JTAG, USB UART | Ethernet | PCIe |
| Memory | HPS DDR3 requires Terasic manual verification | PSRAM 64 Mbit, Onboard flash 32 Mbit | not listed | not listed |
| Level | Intermediate | Beginner | Intermediate | Intermediate |
| Where to get help | Terasic support | r/GowinFPGA | official docs | official docs |
| Known issues | — | Open-source flow is feature-dependent | — | — |