Compare boards
Up to four boards side by side: chip, logic, toolchains, interfaces and price.
| Attribute | DE10-Lite | DE10-Nano | Tang Nano 20K | iCEBreaker |
|---|---|---|---|---|
| FPGA | 10M50DAF484C7G | 5CSEBA6U23I7 | GW2AR-LV18QN88C8/I7 | iCE40UP5K-SG48 |
| Family | MAX 10 | Cyclone V SoC | GW2AR | iCE40 UltraPlus |
| Logic (LUTs) | not listed | not listed | 20736 | 5280 |
| Price | at the seller | at the seller | 28.17 USD | at the seller |
| Open toolchain | no | Mistral | Project Apicula | Project IceStorm |
| Toolchains | Intel Quartus Prime | Intel Quartus Prime | Gowin EDA, Yosys + nextpnr-gowin + Apicula | Yosys + nextpnr + IceStorm, Lattice Diamond Programmer |
| Interfaces | VGA, USB-Blaster | HDMI TX, Ethernet, USB | HDMI, MAX98357A I2S amplifier path, TF card slot, USB Type-C, Onboard BL616 JTAG, USB UART | microUSB FT2232H, FT2232H programming, USB serial |
| Memory | SDRAM requires Terasic manual verification | HPS DDR3 requires Terasic manual verification | 32-bit SDR SDRAM 64 Mbit, Onboard flash 64 Mbit | QSPI flash 128 Mbit |
| Level | Beginner | Intermediate | Beginner | Beginner |
| Where to get help | Terasic support | Terasic support | Sipeed forum, r/GowinFPGA | iCEBreaker community docs |
| Known issues | — | — | Onboard debugger recognition; Flash persistence mode | — |